Grundig Digital Radio User Manual download pdf (Page 15)

DIGITAL RADIO GUIDE TERRESTRIAL TRANSMISSION SYSTEMS - DRM

DRM Source Decoding

super

framing

demux

AAC

Decoder

CELP

Decoder

SBR

Decoder

bit

stream

Audio

output

HVXC

Decoder

Extensive tests on these codecs at the sampling rates and resulting “bandwidths”

have determined that AAC and especially AAC with SBR produce a perceived

audio quality to listeners that is effectively the equivalent of monophonic FM in a 9

or 10 kHz channel. HVXC produces intelligible speech quality with bit rates of 2 to

4 kbps for HVXC and CELP produces excellent speech quality using around 8 kbps.

All of these codecs are a part of the MPEG-4 audio standard.

SBR (Spectral Band Replication) is a special means of enhancing the perception of

a spectrally truncated low band audio signal by utilizing, on a dynamic basis, the

spectral content of the low band information to simulate the missing higher band

behaviour. This requires about 2 kbps and therefore does not seriously subtract

from a 20 to 25 kbps AAC output.

In concept, the technique is not complicated. Consider a violin as an example. A

string stimulated by a bow and the placement of a finger on the string produces a

fundamental frequency and harmonics characteristic of a violin. These frequencies

can go as high as the audibility of the human ear – say somewhere between 15

and 20 kHz.

For a 9 or 10 kHz channel, the AAC sampling and processing of the violin’s output

can only cover the lower part of the audio spectrum, for example not higher than 6

kHz. The SBR algorithm examines this lower band spectrum on a dynamic basis

and infers what the “missing” higher audio frequency “harmonics” probably are.

The level of re-inserted harmonics depends on the 2 kbps SBR helper signal which

describes the shape of the spectral energy in the original signal before truncation

for AAC coding stereo (which uses an additional 2 kbps of SBR). From the

standpoint of a listener, the combined audio output sounds like 15 kHz audio rather

than 6 kHz audio.

(4) Multiplexing, including special channels and energy dispersal

This section refers to the left side of Figure 4.1 through “energy dispersal”, not

including the DI and audio/data encoding portions.

As noted in Figure 4.1, the DRM system total multiplex consists of 3 channels: the

MSC, the FAC and the SDC. The MSC contains the services – audio and data. The

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 117 118

Comments to this Manuals

No comments

Grundig Digital Radio User Manual Page 15

Comments to this Manuals