AACLASSCLASSKLASSEKLASSEGSS Grundig SAT Systems GmbHBeuthener Straße 43D-90471 Nuremberg Phone: +49 (0) 911 / 703 8877Fax: +49 (0) 911 / 703 9210Em
- 10 -- 10 -5 ProgrammingThe following examples show how the PHDQ 4002 BC Cassette is programmed; the output channels can be set from S21 … S41. Set t
- 11 -- 11 -5.2 The menus at a glanceBx 1ATP-Modul:VERSION:MTP15Bx 1AS21-S41 DVB-MTP*** S21Bx 1AC5-12,S3-24TWIN-SATC07Böx 4C5-12,S3-24TWIN-SATC07B
- 12 -- 12 -5.2.1 The menu of channel strip BMBx 1Bf=11836INPUT:-0.4Bx 1B27500INPUT:DVB-S ▶◀/+–/▶◀/+–/Bx 1Bf = 10600 MHzLNB-Freq.:▶◀/Bx 1B14.6 dBC/
- 13 -- 13 -5.3 Cassette programming• Switch on the head end. —> The display shows the software version of the head end (e.g. V.34). —>
- 14 -- 14 -To query software versions: - Software version and type of the Cassette: Press the button once. - Software version of the TP mod
- 15 -- 15 -Bx 1A112.0000 MHzOUTPUT:Bx 1AModulator:OUTPUT:on ▶◀/+–/ The QAM signal is transmitted with a bandwidth of 8 MHz. This means that you
- 16 -- 16 -Press the button. —> The menu “Setting the LNB oscillator frequency” – “LNB-Freq.:” is activated (page 18). or• Press the butt
- 17 -- 17 -strip. Thus you can measure the absolute output level using a analogue test receiver.• Measure the output level of the channel strip using
- 18 -- 18 -• By pressing set the spectral position “normal” or “inverse”. • Press the button. —> The menu “QAM monitoring” – “MODE: Uebe
- 19 -- 19 -Setting the input symbol rate and the DVB modeSetting the symbol rate The symbol rate “SR” of the satellite transponder can be found in t
- 2 -- 2 -Contents1 Safety regulations ...32 General infor
- 20 -- 20 -Setting the input frequency (transponder frequency)Notes:– If three dots “ … ” appear in the second line of the display, the Cassette is i
- 21 -- 21 - Note: At a value lower than “5” picture dropouts can occur.3 If “OK” is shown, the signal to noise ratio is ok. If a value < 5 is sho
- 22 -- 22 -Setting the stuffing (only Bx…A)SR=6900 (= “number 1”): Active output symbol rate Bx 1ASR=6900 (6531)STUFFING: Zahl 1 Zahl 2 Numbe
- 23 -- 23 - Is the “number 1” lower than “number 2” exclama-tion marks “!!” appear in the display. Bx 1ASR=6250 (6531) !!STUFFING:Saving setting
Alterations reserved. Technical data E. & O.E. © by GSS GmbH 26032006
- 3 -- 3 -1 Safety regulations Important• Assembly, installation and servicing must be carried out by an authorised electrician.• Switch off operating
- 4 -- 4 -2.2 Technical dataThe devices meet the following EU directives: 73/23/EEC, 89/336/EECThe product fulfils the guidelines and standards for C
- 5 -- 5 -Connections: SAT inputs: 2 F-connectors HF output: 1 IEC socket, female Connection strip (10-pin): For supply voltages and contr
- 6 -- 6 -2.3.1 Manual display of the software versionIf necessary, you can call up the display of the software version of the control unit manually:
- 7 -- 7 -2.3.3 Explanation of the term “symbol rate”High-quality modulation methods like QPSK and QAM can encrypt several bits as a single transferr
- 8 -- 8 -3 Assembly3.1 Installing the Cassette Warning Before inserting or changing Cassettes, pull the mains plug of the head end out of the m
- 9 -- 9 -Note: The operating software of the Cassette can be updated via the socket “RS 232” 3 (9-Pin-Sub-D) by means of a PC or notebook. Use th
Comments to this Manuals